• ELN__241Wx250H__June2019.jpg

eLITE Series MODEL ELN – (550 W — 1500 W SINGLE PHASE)


Meeting the NFPA 101 and NFPA 111 standards, the eLITE Model ELN is considered “Life Safety Equipment.” The Model ELN is also UL 924 listed as “Emergency Lighting Equipment,” providing the required 90 minutes of emergency backup power. With a front-access design and a small footprint, the Model ELN is suited for wall- or floor-mounted installations.

The Model ELN is compatible with LED drivers/fixtures, and is a perfect choice when providing emergency power to fan motor loads that are a part of the life safety system.

Single Phase Sizes: 550W, 1kW, 1.5kW

PDF: ELN Brochure




• Uninterrupted, regulated sinewave output for use with
“normally on” lighting fixtures / exit lamps. Standby output
for use with “normally off” emergency lighting fixtures.
• Programmable, timed “normally off” bus.
• Integral constant voltage transformer isolates and regulates
output voltage.
• “Normally on” and “normally off” circuit breaker configurations:
550 W: Input main circuit breaker (CB).
Single main output CB standard.
Optional 1 monitored CB or a total of 3 unmonitored CB’s.
1000 W and 1500 W: Input main CB.
3 output CB’s standard. Optional 3 monitored CB’s or a
total of 6 unmonitored CB’s.
• Remote communications via alarm signals or RS232.
• Integral 90 minute battery.
• System approved for 42k AIC rated source.
• Front-access design, with wall- or floor-mount options.
• NEMA 2 enclosure.
• Remote status panel, and automatic phone dialer.
• Generator-compatible.
• Optional accelerated battery charger for full load runtimes
> 90 minutes.
• Optional, externally-mounted NetMinder™ communications
adapter which integrates the inverter into an Ethernet TCP/IP,
MODBUS TCP, or MODBUS RS485 network to remotely monitor
inverter status, electrical parameters, and notify of alarm conditions.
An additional BACnet communications adapter is also available.